Understanding and Resolving Samsung Dishwasher Error Codes
Aside from your oven and refrigerator, your dishwasher is one of the most useful kitchen appliances. Although often overlooked and underappreciated, few appliances save as much time as the humble dishwasher.
Sometimes, though, a dishwasher can become a source of frustration. It refuses to work and, instead of clearly stating the problem, it flashes an incomprehensible, cryptic code indicating something is wrong. These error codes don’t always make sense unless you have a manual handy.
Thankfully, you don’t have to learn a new language to figure out what’s gone wrong with your dishwasher. Keep reading to discover some of the most common Samsung dishwasher error codes and their meanings.
Common Samsung Dishwasher Issues and Solutions
When it comes to dishwasher issues, some are more common than others. Here are some frequent problems and how you can fix them:
Clogged Filter: Many dishwashers made before 2010 have self-cleaning filters, but more recent models usually have a removable filter. Check your manual for instructions on how to detach and clean the filter to fix this issue.
Water Temperature Issue: Dishwashers typically use water around 50 degrees Celsius. Ensure your water heater is set to the proper temperature. If that doesn’t solve the problem, try running your kitchen sink on the maximum heat setting for 30 to 60 seconds before starting the dishwasher.
Clogged Spray Arm: Dishwasher spray arms have small jets that can get clogged with calcium deposits or other materials. Detach the spray arm according to your manual and brush the jets to remove any debris. You may need a toothpick or small bristled stick to clear out any material inside the jet head.
List of Samsung Dishwasher Error Codes and Their Meanings
| Code | Meaning | Solution |
|---|---|---|
| 1E, IE | Clogged filter | Clean the filter according to the instructions in your model’s user manual. |
| 3C | Pump failure | Reset the dishwasher by turning it off and on, then restart the cycle. |
| 3E | Hot water supply error | Check the water supply temperature to ensure it’s between 50-80 degrees Celsius. |
| 4C, 4E | Water supply failure | Confirm that the water pressure meets your model’s requirements. |
| 5C, 5E | Drain error | Check the drain connection at the sink and the drain hose. |
| 7E | Reflector error | Ensure the packing tape has been removed from the waterwall reflector and it is correctly positioned. |
| 9E | Low water level | Empty the dishwasher, add detergent, and run a standard cycle. |
| AP | Access point mode | Reset the machine if not connecting to a mobile device. |
| 6E | Button error | Turn off the dishwasher and press all the buttons on the panel to unstick them. |
| CE | Communication error | Reset the dishwasher. |
| HC, IE | High-temperature error | Turn off the dishwasher at the circuit breaker, empty it, add detergent, and run a normal cycle. |
| HE | Heater error | Empty the dishwasher, add detergent, and run a normal cycle. |
| LC, LE | Leak | If there’s a leak, contact an appliance repair specialist and disconnect the appliance. If not, reset it and inspect the detergent area for spills. |
| OC, 0C, oE | Over-level water | Check and clear any obstructions in the drains. |
| PC | Zone wash error | Reset the dishwasher. |
| PE | Half-load function error | Empty the dishwasher, add detergent, and run a half-load cycle. |
| tE | Temperature sensor error | Empty the dishwasher, add detergent, and run a standard cycle. |
Get Professional Help from Appliance Repair Florida
Don’t let Samsung dishwasher error codes disrupt your kitchen routine. If the solutions above don’t resolve the issue or seem too complicated, call the appliance repair experts at Appliance Repair Florida or schedule an appointment online. Get your dishwasher back to optimal performance today!
