How To Change LED On Joy-Con: A Complete Step-by-Step Guide

Are you tired of the old, dim LED lights on your Joy-Con controllers? Changing the LED on your Joy-Con can enhance your gaming experience and give your controller a fresh, new look. In this comprehensive guide, we will walk you through the process of changing the LED on your Joy-Con, ensuring that you have all the information you need to complete this task successfully. Whether you're a seasoned gamer or a novice, this article will provide you with expert advice and actionable steps to upgrade your Joy-Con’s lighting. Let’s dive in!

Joy-Con controllers are essential for an immersive gaming experience on the Nintendo Switch. While the default LED lights are functional, customizing them can add a personal touch and improve visibility during gameplay. With the right tools and guidance, you can easily change the LED on your Joy-Con and make it uniquely yours. This article focuses on the practical aspects of the process, providing you with all the necessary details to execute the task effectively.

In the following sections, we will cover everything from the tools you need, the step-by-step process of disassembling your Joy-Con, to installing the new LED lights. We will also include safety tips and troubleshooting advice to help you along the way. So, if you're ready to transform your Joy-Con, keep reading!

Table of Contents

• Tools Needed for Changing LED on Joy-Con
• Disassembling the Joy-Con Controller
• Removing the Old LED Lights
• Installing New LED Lights
• Reassembling the Joy-Con
• Testing the New LED Lights
• Safety Tips for Joy-Con Modification
• Troubleshooting Common Issues

Tools Needed for Changing LED on Joy-Con

Before you start changing the LED on your Joy-Con, it’s essential to gather the necessary tools. Here’s a list of tools you will need:

• Small Phillips screwdriver
• Plastic prying tool
• Tweezers
• New LED lights (compatible with Joy-Con)
• Anti-static wrist strap (optional but recommended)

Having the right tools will make the process smoother and ensure you don’t damage your controller during the procedure.

Disassembling the Joy-Con Controller

To change the LED on your Joy-Con, you'll first need to disassemble the controller. Follow these steps:

1. Power off your Nintendo Switch and remove the Joy-Con from the console.
2. Using the small Phillips screwdriver, carefully remove the screws located on the back of the Joy-Con.
3. Once the screws are removed, use the plastic prying tool to gently separate the front and back halves of the Joy-Con.
4. Be cautious not to damage the internal components while prying apart the casing.

Removing the Old LED Lights

After disassembling your Joy-Con, the next step is to remove the old LED lights:

1. Locate the old LED lights on the circuit board.
2. Using tweezers, carefully remove the old LEDs from their sockets. Be gentle to avoid damaging the circuit board.
3. Make sure to note the orientation of the LEDs, as this will help you when installing the new ones.

Installing New LED Lights

Now that you have removed the old LED lights, it’s time to install the new ones:

1. Take the new LED lights and insert them into the correct sockets on the circuit board.
2. Ensure that the polarity is correct; the longer leg of the LED usually indicates the positive side.
3. Press them firmly into place but avoid using excessive force to prevent damage.

Reassembling the Joy-Con

Once you've successfully installed the new LED lights, it’s time to reassemble your Joy-Con:

1. Carefully align the front and back halves of the Joy-Con controller.
2. Replace the screws you removed earlier, tightening them snugly but not overly tight.
3. Ensure that all buttons and components are functioning correctly before proceeding.

Testing the New LED Lights

Before you finish up, it's essential to test the new LED lights:

1. Reattach the Joy-Con to your Nintendo Switch.
2. Power on the console and check if the new LED lights are functioning properly.
3. If the lights do not work, double-check the installation and ensure that the LEDs are correctly positioned.

Safety Tips for Joy-Con Modification

While changing the LED on your Joy-Con is relatively straightforward, it’s crucial to follow safety precautions:

• Always work in a well-lit area to avoid accidents.
• Use an anti-static wrist strap to prevent static damage to the components.
• Handle the internal components with care to avoid damaging them.

Troubleshooting Common Issues

If you encounter problems during or after the installation, here are some common issues and their solutions:

• LEDs not lighting up: Check the polarity and positioning of the LEDs.
• Controller not functioning: Ensure all components are securely reassembled and screws are tightened.
• Unresponsive buttons: Confirm that nothing is obstructing the buttons during reassembly.

Conclusion

Changing the LED on your Joy-Con can significantly enhance your gaming experience, adding a personal touch to your controller. We've covered everything from the tools needed to the step-by-step installation process. By following these instructions, you can successfully upgrade your Joy-Con and enjoy the vibrant new lights.

If you found this article helpful, please leave a comment below, share it with fellow gamers, or explore our other articles for more gaming tips and tricks!

Penutup

Thank you for reading our guide on how to change the LED on your Joy-Con. We hope you found it informative and easy to follow. Don’t forget to check back for more exciting tips and updates about your favorite gaming gear!